COLO-191S-A Powder Coating Gun Control Cabinet
Quick Detail:
The cabinet network could carry up to 24 controller, all parameters can be set on a host controller.
Get typically excellent finishes with consistent uniform film thickness.
Most suitable for high speed converised powder coating lines.
Can integrate with COLO reciprocators, part sensing system for highest efficiency.
COLO-191S-A Powder Coating Gun control Cabinet Description:
1. The cabinet network could carry up to 24 controller, all parameters can be set on a host controller.
2. Get typically excellent finishes with consistent uniform film thickness.
3. Most suitable for high speed converised powder coating lines.
4. Can integrate with COLO reciprocators, part sensing system for highest efficiency.
COLO-191S-A Powder Coating Gun control Cabinet Components
1. COLO-191S Powder Gun Control Uuit
1) Designed exclusively for use with Colo manual and automatic powder guns.
2) All settings for efficient powder coating are made simple and reproducable on the 191S thanks to digital valve control.
3) Permit accurate setting of powder flow for the optimum powder coating rate.
4) Corona current and voltage also can be checked on the LED display even from a distance.
5) With three pre-setted models, easy operation for flat workparts, complex workparts, and re-coating jobs.
6) Allows create and store 20 applications programs optilized for parts and powders.
2. COLO-08 Manual Powder Gun Features
1)This 100kv spray gun always provides high transfer efficiency and saves powders.
2)Just press the “P” button to move between coating modes. And use the handy up and down arrows for adjusting powder flow.
3)Comes with full array of nozzle assortment to optimize your spray effect, including fan spray nozzles, and round nozzles, extension nozzles.
Specifications:
Power range |
100-240 V |
Frequency |
50/60HZ |
Input power |
50W |
Temperature range in use |
-10℃ - +50℃ |
Powder Gun |
COLO-08 |
Gun weight: |
500G |
Input voltage |
MAX12V |
Input current |
MAX1A |
Maximum output current |
180Ua(max) |
Maximum output voltage |
0-100KV ( adjustable) |
Maximum powder injection |
600g/min |
Polarity |
negative (-) |
Pneumatic technical spec |
|
Maximum input-air pressure |
10 bar / 145 psi |
Optimum input-air pressure |
6 bar / 87 psi |
Maximum water vapor content or compressed air |
1.3 g/m3 |
Maximum oil vapor content of compressed air |
0.1 mg/m3 |
Maximum cimpressed-air consumption |
13.2 m3/h |